A

These are the correct BC Racing upper spring seats with Koyo Bearing for your 2009 Honda Civic A-18-BR Series kit. If you're experiencing noise that is continuing to get louder over time, I recommend checking the top nut and resetting the front spring preload.

By on October 17, 2017. 
Was this review helpful to you? yes no
A

BC Racing linear springs have an ID (inner diameter) of 62mm.

By on October 17, 2017. 
Was this review helpful to you? yes no
A

The Z-09-BR kit will drop the 13- Dodge Viper ~3.5" front and rear.

By on October 17, 2017. 
Was this review helpful to you? yes no
A

The BC Racing F-22-BR Series Front Camber Plates are engineered for the 00-04 Subaru Outback BH/BE chassis.

By on October 17, 2017. 
Was this review helpful to you? yes no
A

Your front damper uses a 20mm dust boot. Your rear damper uses a 12.5mm dust boot.

By on October 17, 2017. 
Was this review helpful to you? yes no
A

Your front damper uses a 20mm bump stop. Your rear damper uses a 12.5mm bump stop.

By on October 17, 2017. 
Was this review helpful to you? yes no
A

Your front damper uses a BR-M12 adjustment knob. Your rear damper uses a BR-M10 adjustment knob.

By on October 17, 2017. 
Was this review helpful to you? yes no
A

The off the shelf spring specs on the BC Racing BR Series E-10-BR 94-04 Mustang SN95 are 8.6" 448 lbf front and 7" 280 lbf rear. The front spring on the E-10-BR kit is linear and can be changed out to a different rate and/or length if needed.

By on October 17, 2017. 
Was this review helpful to you? yes no
A

The regular springs are our BC Racing Springs that come standard on all our off the shelf BR Series, RM Series, and ER Series kits. BC Racing springs can be customized in regard to spring rate and length with shock valving to match when you purchase your kit.

By on October 17, 2017. 
Was this review helpful to you? yes no
A

The "left" is driver side USA and the "right" is passenger side USA.

By Angel M on December 07, 2017. 
Was this review helpful to you? yes no
A

A coupe is typically and almost always a 2 door vehicle while a sedan is almost always a 4 door vehicle. Some of our coilover kits fit both coupe and sedan if both models are produced on the same chassis.

By paolo d on December 23, 2017. 
Was this review helpful to you? yes no
A

Frame dimensions are 12.5" x 6.5.

By Jonathan D on January 02, 2018. 
Was this review helpful to you? yes no
A

Our BC Racing BR Series Coilover kit (SKU E-10-BR) for the 1994-2004 Ford Mustang (does not fit Cobra) comes standard with front camber plates. The rear suspension reuses OEM upper mounting hardware. Camber-Caster plates are not currently available for this vehicle.

By Charles C on January 06, 2018. 
Was this review helpful to you? yes no
A

No, this is not the correct damper for your 2011 Camry LE. The corect damper is BR Series Front Damper 300150MF120M12.

By Sylon P on January 12, 2018. 
Was this review helpful to you? yes no
A

A BC Racing Extreme Low Kit is a variation of our standard BR Series Coilover System that utilizes shorter dampers and springs than our standard off-the-shelf kit to allow for a more aggressive drop. Depending on the vehicle, the drop can range from 1"-2" lower than the standard kit.

By Roman C on January 24, 2018. 
Was this review helpful to you? yes no
A

Our standard kit will drop the car between 1"-2.5" below OEM ride height. Our Extreme Low kit will drop 1" lower. These measurements may vary depending on other upgrades or modifications you have made to your Ford Focus ST.

By Gavin M on February 01, 2018. 
Was this review helpful to you? yes no
A

Between three and five studs and bolts, depending on which coilover kit you have.

By Jose S on February 12, 2018. 
Was this review helpful to you? yes no
A

Adjust the height on your 2017 WRX by lossening the lower mount locking ring and then threading the black shock body into or out of the lower mount. You do not need to touch the springs at all (please don’t mess with the springs as it will change the spring preload and could result in noise.

By on February 13, 2018. 
Was this review helpful to you? yes no
A

If your car is a dedicated track vehicle, we recommend the ER, RM, or ZR Series. If your car doubles as your Daily Driver, our BR and DS Series provide a more forgiving ride on public streets and roadways without sacrificing performance, grip, or cornering at the track.

By David H on February 17, 2018. 
Was this review helpful to you? yes no
A

The 2002-2007 WRX comes standard with 8kg front and 6kg rear spring rates. We recommend that you keep the ratio consistent so if you would like a 6kg front, we recommend a 4kg rear.

By Stuart R on February 19, 2018. 
Was this review helpful to you? yes no

It's not about where you start. It's about where you are. Founded in a garage in 2006, BC Racing North America currently offers over 1100 suspension kits through our distribution and supply chain and in-house sales team. Some people dream of success. We just wake up and work.

CONTACTS

512 S Econ Circle.
Oviedo, FL 32765
United States

Phone: 321-206-6381


Email: [email protected].com

Open:

​​​​​​​Monday-Friday 9:30am-5:30pm EST
Saturday - Closed
Sunday - Closed

BC Racing North America does not cover labor costs under any cirumstances.